Saturday 3 September 2011

Set up and Use Internet Connection Sharing

With Internet Connection Sharing (ICS) in Windows XP, you can connect one computer to the Internet, then share the Internet service with several computers on your home or small office network. The Network Setup Wizard in Windows XP Professional will automatically provide all of the network settings you need to share one Internet connection with all the computers in your network. Each computer can use programs such as Internet Explorer and Outlook Express as if they were directly connected to the Internet.
You should not use this feature in an existing network with Windows 2000 Server domain controllers, DNS servers, gateways, DHCP servers, or systems configured for static IP addresses.


Enabling ICS

The ICS host computer needs two network connections. The local area network connection, automatically created by installing a network adapter, connects to the computers on your home or small office network. The other connection, using a 56k modem, ISDN, DSL, or cable modem, connects the home or small office network to the Internet. You need to ensure that ICS is enabled on the connection that has the Internet connection. By doing this, the shared connection can connect your home or small office network to the Internet, and users outside your network are not at risk of receiving inappropriate addresses from your network.
When you enable ICS, the local area network connection to the home or small office network is given a new static IP address and configuration. Consequently, TCP/IP connections established between any home or small office computer and the ICS host computer at the time of enabling ICS are lost and need to be reestablished. For example, if Internet Explorer is connecting to a Web site when Internet Connection Sharing is enabled, refresh the browser to reestablish the connection. You must configure client machines on your home or small office network so TCP/IP on the local area connection obtains an IP address automatically. Home or small office network users must also configure Internet options for Internet Connection Sharing. To enable Internet Connection Sharing (ICS) Discovery and Control on Windows 98, Windows 98 Second Edition, and Windows Millennium Edition computers, run the Network Setup Wizard from the CD or floppy disk on these computers. For ICS Discovery and Control to work on Windows 98, Windows 98 Second Edition, and Windows Millennium Edition computers, Internet Explorer version 5.0 or later must be installed.

To enable Internet Connection Sharing on a network connection

You must be logged on to your computer with an owner account in order to complete this procedure.
Open Network Connections. (Click Start, click Control Panel, and then double–click Network Connections.)
Click the dial–up, local area network, PPPoE, or VPN connection you want to share, and then, under Network Tasks, click Change settings of this connection.
On the Advanced tab, select the Allow other network users to connect through this computer’s Internet connection check box.
If you want this connection to dial automatically when another computer on your home or small office network attempts to access external resources, select the Establish a dial–up connection whenever a computer on my network attempts to access the Internet check box.

If you want other network users to enable or disable the shared Internet connection, select the Allow other network users to control or disable the shared Internet connection check box.
Under Internet Connection Sharing, in Home networking connection, select any adapter that connects the computer sharing its Internet connection to the other computers on your network. The Home networking connection is only present when two or more network adapters are installed on the computer.

To configure Internet options on your client computers for Internet Connection Sharing

Open Internet Explorer. Click Start, point to All Programs, and then click Internet Explorer.)
On the Tools menu, click Internet Options.
On the Connections tab, click Never dial a connection, and then click LAN Settings.
In Automatic configuration, clear the Automatically detect settings and Use automatic configuration script check boxes.
In Proxy Server, clear the Use a proxy server check box.

HOW TO ENABLE OR DISABLE TASK MANAGER?

Is your system is affected by virus and disabled your task manager?administrator has blocked task manager.Do you have these problems? then try the below trick to enable task manager
1. Go to Start->Run and type gpedit.msc press ok
group policy window will open.
2. In the group policy window navigate to User Configuration->Administrative Templates->System->Ctrl+Alt+Del options
3. Then open Remove Task Manager, in that there are there options Not Configured, Enabled, Disabled, by default Not configured is selected
4. To enable the task manager select disabled and press ok.
5. To disable the task manager select enabled and press ok.

How to Convert a FAT Partition to NTFS

To convert a FAT partition to NTFS, perform the following steps.
Click Start, click Programs, and then click Command Prompt.
In Windows XP, click Start, and then click Run.

At the command prompt, type CONVERT [driveletter]: /FS:NTFS.
Convert.exe will attempt to convert the partition to NTFS.

NOTE: Although the chance of corruption or data loss during the conversion from FAT to NTFS is minimal, it is best to perform a full backup of the data on the drive that it is to be converted prior to executing the convert command. It is also recommended to verify the integrity of the backup before proceeding, as well as to run RDISK and update the emergency repair disk (ERD).

Convert.exe will attempt to convert the partition to NTFS.

Hack Your Friends Gmail Password-Gmail Hacking Tool Free Download

Hi friends,
Today I am Introducing a new tool to hack your enemies Gmail password.It is a newly developed software for hacking Gmail password and google account password.It is for educational purpose and don’t misuse it.Here I am with the latest tool gmail_hackerV3.2.0.Its a highly spreading password hacking tool in the Internet world.Again I am repeating that dont misuse it and its only for proving the security issues of google.

Link
Download Gmail Password Hacking Tool V2.9
Download the zip file and extract it in your system.
Note:Since it is a hacking software,Please disable your antivirus and firewall.This may delete the hacking software

How To Automatically Defrag Drives

I found an article on the web the other day about automatically defragmenting drives and thought that I might just as well post a tutorial about it here. Basically, this allows you to defrag any drive by right-clicking on it and choosing “defrag.”



To enable this, open notepad and paste the following code:
; context_defrag.INF


; Adds Defrag to the right click context menu in Windows XP
[version]signature=”$CHICAGO$”
[DefaultInstall]AddReg=AddMe
[AddMe]
HKCR,”Drive\Shell\Defrag\command”,,,”DEFRAG.EXE %1″ Next save it as context_defrag.inf onto your desktop or basically anywhere… (Note: be sure to save it as All Files and not Text Documents!)
Right-click on it, choose Install and you’re ready to start defragmenting!

Tera Copy V 2.2 Pro With Cracked Serial Download


TeraCopy is a compact program designed to copy and move files at the maximum possible speed, providing the user with a lot of features:
  • Copy files faster. TeraCopy uses dynamically adjusted buffers to reduce seek times. Asynchronous copy speeds up file transfer between two physical hard drives.
  • Pause and resume file transfers. Pause copy process at any time to free up system resources and continue with a single click.
  • Error recovery. In case of copy error, TeraCopy will try several times and in the worse case just skip the file, not terminating the entire transfer.
  • Interactive file list. TeraCopy shows failed file transfers and lets you fix the problem and recopy only problem files.
  • Shell integration. TeraCopy can completely replace Explorer copy and move functions, allowing you work with files as usual.
  • Full Unicode support.
  • Windows 7 x64 support.

Airtel Updated GPRS Hack Via UC Browser 7.7 Handler

Earlier we are discussed about LCG X-Plore a Better File Manager For Symbian Phone.It should be useful for every one.
Today iam introducing a new method of hacking Airtel GPRS via UC Browser.
UC Browser is a smart and intelligent software for browsing internet.It have morethan 10 million users.The main feature of UC Browser is its Download Manager.It is very effective and very user friendly, by this you can pause and resume downloading.


Features Of UC Browser
  • Site Navigation
  • Lightning Speed
  • Free-Link
  • Download Manager
  • Compression technology
  • Stable Network
  • Powerful search
  • Multi Tabs
  • File Manager
  • Night mode

Today this UC Browser is hacked for getting free gprs for all users.
You need to make the following steps to get hacked free gprs via UC Browser.
Steps You Have To Follow
1-Download Uc Browser Hack by www.Trickshero.co.cc
2-Use Default Mobile Office Setting_Click Here
3-Install UC Browser Hack by www.trickshero.co.cc in your mobile
4-You are done.
Your Uc Browser Airtel GPRS hack is over and you can enjoy free browsing and downloading via latest UC Browser.
If You face any difficulties,post your problems in comment box.
We should reply for your problem shortly.